FINISHING
We provide a complete range of finishing products to obtain high quality articles. Waxes and caseins, aqueous pigments, metallic dyestuffs, pull up oils, solvents and aqueous lacquers, acrylic and polyurethane resins.
Filter the formulas by selecting a category
EA-R-16128
LEATHER FOR SHOES
Finished articles for footwear on corrected skin
Finished articles for footwear on corrected skin, in order to disguise imperfections. This is achieved by making a pigmented layer with SERCRYL AFR and a final lacquer SERLAC LWN-57 (water based lacquer).
EA-R-16129
FLORANTIQUE
Finished footwear articles where we apply a layer of the SERCRYL A-491
Finished footwear articles where we apply a layer of SERCRYL A-491, which provides high coverage and resistance. After, at the final stage, we apply SERLAC SWH, which has a great resistance to friction, together with SERLAC LWF-INC, which is a soft lacquer that helps in the moment of polishing the skin. Thus we achieve a good contrast and brightness.
EA-R-17090
WATER REPELLENT
Application of REPELANT ZWD / 6
Application of REPELANT ZWD / 6, to obtain a waterproof effect.
EA-R-17111
SPIRIT
Finishing on vegetable crust. In order to achieve a waxy finish we use a layer with a pull oil SERGRAS SA-3 and a SERNA W-38 / C wax and as a top end SERBRILL ZB-21, which gives a natural brightness.
EA-R-17128
SPIRIT
Finishing for footwear on full grain bovine
Finishing for footwear on full grain bovine. Where we want to obtain a snowy finish, with a white wax SERBRILL W-58 / B. This gives a very soft touch and a very good snow effect.
EA-R-17129
NATURAL PULL-UP
Finishing for footwear
Finishing for footwear. Where we want to achieve a very natural pull-up effect we use SERGRASS 4700. This gives us a strong pull-up effect.
EA-R-17152
HIGH GLOSS
Finishing on wet blue crust to achieve a bright finish without the need for lacquer
Finishing on wet blue crust to achieve a bright finish without the need for lacquer. For this we apply a background with SERCRYL AFR and a layer with SERCRYL PU-345, SERCRYL PU-301 and SERBRILL BB, for a very high level of brightness.
EA-R-17158
CATIONIC NAPPA
Finishing for wet blue small leather for footwear
Finishing for wet blue small leathers for footwear. In this process we apply a cationic preface and an anionic background in order to get good coverage and a very soft touch.
EA-R-17187
SOFT SCARLET
Finishing on wet blue crust to achieve a bright finish without the need for lacquer
Finishing for a wet blue leather to achieve a waxy look, SERBRILL W-58 / B and some pull-up effect with SERGRAS SA-3. We also obtain a natural brightness with SERLAC SWH bi-phase lacquer.
EA-R-17187
BLACK RUBBER
Finishing process for wet blue footwear articles
Finishing process for wet blue footwear articles. It is a SERBRILL W-38/40 wax base finishing and rubber finishing with the SERCRYL GUM.
EA-R-17221
WAX SHOE UPPER
Finishing process for a wet blue napa
Finishing process for a wet blue napa. We use a SERBRILL W-38/40 bottom for a WAXY effect, a layer of SERCRYL R-28 for good coverage and resistance, a lacquer to protect the SERLAC LW-37 finishing effect.
EA-R-17222
PULL BREAK
Finishing on split leather
Finishing on split leather. Here we use a finishing process combining the waxy effect with SERBRILL W-38/40 and a broken effect with SERCRYL A-410.
EA-R-17230
FANTASY
Finishing on split leather to obtain a brittle finish with fantasy touch
Finishing on split leather to obtain a brittle finish with fantasy touch, using SERCRYL A-410 to achieve the broken effect.
EA-R-17266
NATURAL LUCID YELLOW
Finishing for footwear on wet white based leather
We highlight SERTAN VEM (vegetable extract), which provides the leather with great fullness and compactness. In the fatliquoring we highlight SEROIL SLL, which gives the skin a waxy-smooth feel, and SEROIL PLSN with SEROIL TTK for excellent fibre lubrication and to avoid grain looseness.
EA-R-17269
CATIONIC SHOE NAPPA
Finish for footwear on wet white
To achieve a natural finish so we use SERGROUND K-4 (cationic) and SERCRYL PU-AK (cationic polyurethane). SERCRYL AFR gives a very good coverage and resistance, and the lacquer SERLAC LW-37 has a very good brightness and good rubbing fastness.
EA-R-17281
BLACK NAPPA
Finishing for wet blue footwear napa
Finishing for wet blue footwear napa. This is a finishing process that uses SERCRYL AFR, which gives a lot of coverage and resistance, and the lacquer SERLAC SWH, which has a good brightness and a good rubbing fastness.
EA-R-17324
WAX GLOSS
Finish for footwear where we apply a bottom agent with SERBRILL W-63
To obtain great brightness, we also use SERCRYL PU-345 as a gloss, without using lacquer.
EA-R-17341
SHRUNKEN GOAT
Finish on crust wet blue goat
In order to achieve a wrinkled finish, we use a pre-bottom agent with SERBRILL W-38/40 (carnauba wax).
EA-R-17352
VACHETTA SAND
Finish on wet white, for bags
We use SERGRAS SA-3 (feeling agent) and SERBRILL ZB-21 (wax), which give a natural shine, good resistance and a natural finish.
EA-R-17355
ORANGE
Finish for footwear on wet white
To achieve a natural finish, we use SERCRYL R-28.
EA-R-17363
LEATHER GOODS
Finish on wet white for bags
In this finish we use SERCRYL AFR, which gives us a lot of coverage and resistance and SERCRYL PM2, which gives us a matt finish.
EA-R-18019
WHITE WAX
Application (wax) on wet white to achieve a natural finish and an aged effect.
We highlight SERGRAS SA-3 (pull-up oil), SERBRILL W-38/40 (carnauba wax) and SERBRILL BB (casein), which give us a natural shine.
EA-R-18020
UPPER WET WHITE
Finish on wet blue for footwear
In this finish we use SERCRYL A-422 (acrylic resin), BLACK CAPAFIN W and SERLAC SWH (Biphase lacquer), which give a lot of shine and a natural finish.
EA-R-18053
–
Finish on wet blue crust
To achieve a light aged finish with a lot of shine we use SERBRILL W-38/40 (carnauba wax) and SERCRYL A-410 (acrylic resin).
EA-R-18055
OCEAN
Finish on wet white for footwear
We use SERGRAS SA-3 (feeling agent) and SERBRILL BB (wax), which provide natural shine, good resistance and a natural finish.
EA-R-18057
CRAZY HORSE
Finish on wet blue for footwear
It is a ‘crazy horse’ finish. The combination of SERGRAS 3400 (wax and pull-up oil) and SERGRAS 4800 (synthetic oil) provide the leather with a soft touch and an aged effect finish.
EA-R-18074
BROWN SOFTY WALLET
Finish on wet blue crust
To achieve a natural finish we use SERCRYL R-28 and PARDO CAPAFIN MF.
EA-R-18075
BLACK NAPPA
Finish on wet blue crust
To achieve a natural finish we use SERCRYL AFR and the new CAPAFIN BLACK SH, which gives very good coverage and resistance, and the lacquer SERLAC LW-37, which provides very good shine and good rubbing fastness.
EA-R-18098
BICOLOR BELT
Finish on wet white crust for belts
We highlight SERCRYL A-491 (acrylic resin) to be applied on the flesh side, to seal it. We use SERCRYL AFR (acrylic resin), which gives a lot of coverage, and SERBRILL ZB-21 to achieve natural shine.
EA-R-18099
SOFT STRAWBERRY
Finish on goat wet white crust
We use SERGRAS 4800 to achieve a pull-up effect finish, and SERBRILL ZB-21 for a natural shine.
EA-R-18103
PIGMENTED LEATHER GOODS
Pigmented finish on vachetta for leather goods.
We highlight SERCRYL R-28 (acrylic resin), which supplies high coverage without loading the grain. SERBRILL BB (wax) gives natural gloss.
EA-R-18103/2
PULL UP LEATHER GOODS
Pull up finishing on wet white for leather goods.
Pull up finishing on wet white for leather goods. We highlight SERGRAS SA-3 (pull up oil) and SERBRILL W-38/C (carnauba wax).
EA-R-17266
VANILLA CREAM
Process on shaved wet blue (1,4 mm)
We highlight SERTAN VEM (vegetable extract), that provides the leather with great fullness and compactness. In the fatliquoring we highlight SEROIL SLL which gives the skin a wax-smooth feel, and SEROIL PLSN with SEROIL TTK for an excellent fiber lubrication and avoid grain looseness.
EA-R-18108
RED SNOW
Footwear finish on full grain cowhide
We want to achieve a Snow finish with SERBRILL W-58/B (white wax), which gives a very soft feel and a very good Snow effect.
EA-R-18113
GREEN APPLE
Process on shaved wet white for footwear (1.5)
In this process we highlight SERTAN VGM-Q and SERTAN VHM (vegetable extracts), which give fullness and compactness to the leather. In fatliquoring we emphasize the combination of SEROIL CMT and SEROIL TTK, which give soft leather and a very soft feel.
EA-R-18114
NATURAL BLACK
Process on shaved wet white for footwear (1.5).
In this process we highlight SERTAN VGM-Q and SERTAN VEM (vegetable extracts), which give fullness and compactness to the leather. In fatliquoring we emphasize the combination of SEROIL CMT and SEROIL TTK, which give soft leather and a very soft feel
EA-R-18119
STARRY NIGHT
Finish on wet blue split for leather goods.
We highlight SERCRYL R-28 (acrylic resin), which ensures high coverage without loading the grain and its nacre powder that provides fantasy gloss. SERLAC SWH (biphasic lacquer) gives high gloss and a natural finish. SERTACK W-125 (feeling agent) gives a nice, warm feel.
EA-R-18120
SHOE WATERPROOFING
Finish on vegetable nubuck.
Pigmented pull up for footwear. We highlight SERBRILL W-PLL (wax for pull), which gives an inverted pull-up effect, and RED CAPAFIN WF (pigment).
EA-R-18121
GREEN GUMMY
Laminated finishing on wet blue for fantasy bags.
We highlight SERCRYL GUM (special resin), which gives a very nice feel reminiscent of rubber.
EA-R-18124
SOFT WAX BLUEBERRY
Wax finishing on wet blue for fantasy bags.
We highlight SERBRILL W-74 (pull up wax), which gives us a very nice feel, and SERBRILL BB (casein).
EA-R-18131
BLACK CATIONIC PIGMENT
SERLAC LW-80 unitary application (lacquer without nitro) on wet blue.
EA-R-18141
BELT VAQUETTA
Florentique on vachetta.
A finishing for footwear where a bottoming is applied with SERCRYL A-491, which gives high coverage and resistance. After we apply SERLAC SWH, which provides a great rubbing resistance combined with SERLAC LWF-INC, a new soft lacquer that helps at the time of polishing the leather, thus a good contrast and gloss is achieved.
EA-R-18146
CRAZY HORSE
Crazy horse finish on wet blue crust.
Crazy horse finish on wet blue crust. We use SERGRAS 3400 (wax and pull-up oil) combined with SEGRAS 4800 (synthetic oil), to give a soft touch and an aged finish.
EA-R-18152
HAVANA BUFALL FLOTTER
Process on shaved wet blue buffalo (1,5).
We highlight SERTAN VLM and SERTAN VHM (vegetable extracts), which give fullness and compactness to the leather, and SERTAN RN-S (natural polymer) that gives a very nice feel. In fatliquoring we emphasize the combination of SEROIL L, SEROIL CMT and SEROIL GBF (synthetic polymer) that gives the skin a wax-smooth feel. Achieves excellent fibre lubrication. No grain looseness.
EA-R-18153
COW GRAIN CRACKLE
Process on wet blue cowhide, to get a crust crack.
In this process we highlight SERTAN VGM and SERTAN VHM (vegetable extracts), which give fullness and compactness to the leather. SERTAN RM (drum acrylic resin) helps in the process to achieve the crack effect. In fatliquoring we emphasize SEROIL GBF (synthetic polymer), which gives excellent fibre lubrication. No grain looseness.
EA-R-18161/1
GLOSS VAQUETTA I
Application on vaquetta to achieve a natural glossy finishing.
We highlight SERCRYL PU-345 (polyurethane resin substitute of nitro lacquer), SERBRILL BB (casein) and SERLAC LW-80 (without nitro).
EA-R-18161/2
GLOSS VAQUETTA II
Application on vaquetta to achieve a natural glossy finishing.
We highlight SERCRYL AFR (full coverage acrylic resin) and the new pigment PARDO CAPAFIN MF and SERLAC SWH (high gloss biphasic lacquer).
EA-R-18169
RED BLOOD
Finish type patent on WB crust.
We emphasize SERCRYL AFR (acrylic resin) which provides very good coverage, and SERCRYL A-PU-345 (polyurethane resin used as a replacement of the nitro lacquer) that gives high gloss.
EA-R-18171
SHINING GRASS
Finish WAX-PULL UP on goat wet white crust.
We use SERGRAS 4800 to achieve a finish with pull-up effect and SERBRILL ZB-21 to achieve a natural gloss.
EA-R-18172
WILD
Finish on wet white to achieve a 3D effect.
We highlight SERANILS N (anilines) and SERCRYL A-460 (universal resin), which is self-crosslinking and provides an elastic and flexible film, in combination with SERCRYL PU-301 (polyurethane resin) which gives great rubbing resistance.
EA-R-18174
SERLAC LW-80 N
Unit application of SERLAC LW-80 N (lacquer without nitro) on wet blue.
EA-R-18175
SERLAC LW-80 W
Unit application of SERLAC LW-80 W (lacquer without nitro) on wet blue.
EA-R-18200
PIGMENTED PULLUP FOR FOOTWEAR
Finish on vegetable nubuck.
We highlight SERBRILL W-PLL (wax for pull-up), which gives an inverted pull-up effect, and RED CAPAFIN WF (pigment).
EA-R-18205
CRAZY PULL UP
A finishing process which combines pull-up with crazy horse on wet white crust with the combination of SERGRAS 3400 (wax and pull-up oil) with SERGRAS 4800 (synthetic oil) to give a soft feel and an aged finish.
EA-R-18208
Finish on brown nubuck.
In this application we highlight AU-01. This product is used for “flake” or “teardrop” finishes because they confer a splashed appearance to the leather. We also underline SERBRILL W-38/40 (Carnauba wax) which gives us a soft and fine feel. SERCRYL A-490 (acrylic resin) gives an excellent anchorage, brightness and elasticity.
EA-R-19006
Finish for brush off effect.
We emphasize SERBRILL W-52 (wax) that gives burnish effect and SERLAC LW-MT (watery lacquer) that gives a natural touch.
EA-R-19023
Finish for pull up effect.
We emphasize SERGRAS SA-3 (pull-up oil), SERCRYL PU-304 (natural polymer) in order to improve the anchorage and SERCRYL R-28, which gives a smooth and natural finish.
